46 Ergebnisse

  • PVL1300 für den Einsatz mit patentiertem DUAL System

    Produkt von ELPRESS AB
    InnoTrans 2018
    PVL1300DUAL ist ein ergonomisch ausbalanciertes Batterie werkzeug mit einer Crimpkraft von 13 Tonnen zum Crimpen von flexiblen Leitungen und hochwertigen Anforderungen. Es können alle herkömmlichen Gesenke aus unseren anderen Produktreihen verwendet werden. PVL1300DUAL ist für Leiterquerschnitte bis 300 mm² ausgelegt. Das DUAL System kann in allen Bereichen, wie z.B. LKW-, Windenergie-, oder Schienenfahrzeugbereich eingesetzt werden. Überall dort wo erhöhte Anforderungen an die Verbinder…
    Merken
  • Railvac 16000

    Produkt von Railcare Export AB
    InnoTrans 2018
    The Railvac™ 16000 is a 10” self-propelled suction machine. With the power of two 250kW diesel engines each connected to a 3-lobe vacuum pump, a unique suction power is created. 16000m³ airflow/hour 950mbar of vacuum. Excavated material will be transported by an airflow of 90m/s through the hose into the 25m³ material hopper. The air and residual dust passes into the filter chamber where a 70m² filter separates the dust. Leaving the Railvac™, the air is cleaner than when entering. T…
    Merken
  • Resistors

    InnoTrans 2018
    Our Power Resistors are used both on-board and in stationary railway applications. The overhead line is checked against failures by switching a power resistor in series with the power grid. The current is measured and by this the status of the line is determined. Of course, if there is a fault with the overhead lines, the fast-switch will not be activated. The fast-switch is a vital and expensive component in sub-stations. Its life time greatly depends on the number of short circuits it has to h…
    Merken
  • RF Interface cable QMA-F st. bh./IPEX MHF-4 25cm

    Produkt von Techship AB
    InnoTrans 2018
    RF Interface cable QMA-F straight bulkhead to IPEX MHF-4. 25cm 0.81mm coax cable.
    Merken
  • Rollstuhllift für Schienenfahrzeuge INV-300-CU

    Produkt von U-Lift AB
    InnoTrans 2018
    INV-300-CU kann in die meisten Waggoneinstiege montiert werden. INV-300-CU ist für Rechts-und Linksmontage lieferbar. Solide und robuste Konstruktion sorgt für hohe Zuverlässigkeit und Lebenslänge. Hubhöhe 750 mm, Tragfähigkeit 350 kg. Sicher und komfortabel für den Passagier. Hydraulisches Herunterklappen der Plattform von vertikal auf horizontal als Option.
    Merken
  • Rollstuhllift für Schienenfahrzeuge INV-300-CW

    Produkt von U-Lift AB
    InnoTrans 2018
    INV-300-CW kann in die meisten Waggoneinstiege montiert werden. INV-300-CW ist für Rechts-und Linksmontage lieferbar. Solide und robuste Konstruktion sorgt für hohe Zuverlässigkeit und Lebenslänge. Hubhöhe 1000 mm, Tragfähigkeit 350 kg. Sicher und komfortabel für den Passagier. Hydraulisches Herunterklappen der Plattform von vertikal auf horizontal als Option.
    Merken
  • Rubber Bushing

    Produkt von Gadelius Europe AB
    InnoTrans 2018
    Merken
  • SiTrack:One

    Produkt von HEXAGON
    InnoTrans 2018
    SiTrack:One ensures complete coverage of the entire rail infrastructure surface without the need to receive GNSS signals for position information. With a one-of-a-kind mounting design, this total solution for rail maintenance and refurbishment produces synchronised engineering, survey-grade 3D point clouds for accurate as-built drawings. A full day’s work of surveying can easily be accomplished with re-chargeable, hot-swappable batteries.
    Merken
  • SKF Insight Rail

    Produkt von AB SKF
    InnoTrans 2018
    Wireless wheel bearing monitoring boosts train maintenance efficiency.  SKF Insight Rail is a wireless Industrial IoT system that gathers wheel and bearing performance data and transmits it to a remote diagnostics center, for fast diagnostics of mechanical problems.The system supports condition based maintenance practices (CBM) that will help rail operators spend their maintenance budgets more effectively. It relies on retrofitting a small advanced, wireless sensor to the wheelset axlebox to det…
    Merken
  • SKF Passenger bearing 1.7 million kilometres

    Produkt von AB SKF
    InnoTrans 2018
    Extend passenger train bearing maintenance intervals to 1.7 million km. With improved features, such as contact geometry, heat treatment, and seals, the new generation of roller bearing units (TBU and CRU) for passenger trains from SKF is designed to go 1.7 million km between maintenance intervals, enabling bearing maintenance to be aligned with the longest wheelset maintenance intervals. Additionally SKF calculations indicate a 40% increase in L10 bearing life compared to previous offers. The n…
    Merken
  • Snow Melter SR700

    Produkt von Railcare Export AB
    InnoTrans 2018
    The SR 700 is, with its 12 MW installed power, designed to melt 1000 m³ snow per hour. It is built on three well proven components: The Snow Blower The Melting Reservoir The Container Wagon The hydraulically driven Snow Blower, with its side and main brushes, has a capacity of 1300 m³/hour. After transport into the Melting Reservoir, the melting process works like a heat exchanger with a power of 12 MW. Circulating warm water is melting the snow in a continuous process. The excess …
    Merken
  • Specific Projects

    Produkt von Bogesunds Väveri AB
    InnoTrans 2018
    Special fabrics for unique environments We have many years of experience in designing fabrics that are intended for a specific interior design project. It may be about changing the colors of an existing upholstery fabric, or creating something completely new. Bogesunds’ design team works in close cooperation with the production team, which means that, after a dialogue with the client, we can quickly move from idea to proposal to solution.
    Merken