1208 results

Filter search

Apply filters

Types

Halls

Region

1208 results

  • "PULLPO" ball bearing puller set, K-70-C

    • InnoTrans 2018
    • Hall 20 112
    To remove grooved ball bearings without causing damage and without having to dismantle the shaft. Description With this puller, grooved ball bearings that are simultaneously located on a shaft and in a casing can be quickly and easily removed. Puller is self-tensioning and easy to handle. Pulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force. Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the ja…
    Save
  • 214RR

    Product of START PAC
    New
    • InnoTrans 2018
    • Hall 15.1 102
    Save
  • 22.90 and 88.90 COACHES

    • InnoTrans 2018
    • Hall 23 526
    Length over the buffers: 26.400 mm; Gauge: 1.435 mm; Height from top to rail level: 4.050 mm; Speed: 200 km/h; Bogie type: Minden Deutz; Brake type: KE-GPR-Mg(D) ep, NBÜ; Empty weight: 42,9 t for both types of coaches; Multi-voltage static converter SSVC 43 type: Input voltage: 1000 V/16 2/3 Hz; 1500 V/50 Hz; 1500 Vdc; 3000 Vdc; Output voltage: 24 Vdc, 230 V/50 Hz, 3x400 V/50 Hz; Doors actuation installation: electro-pneumatic with centralized control through RIC key; Sanitary installati…
    Save
  • 3324RR

    Product of START PAC
    New
    • InnoTrans 2018
    • Hall 15.1 102
    Save
  • 3370RR

    Product of START PAC
    New
    • InnoTrans 2018
    • Hall 15.1 102
    Save
  • 3D Metrology

    • InnoTrans 2018
    • Hall 8.1 217
    GMA Werkstoffprüfung GmbH uses state-of-the-art laser tracker systems for a wide range of demanding geometric measurements in industry. These are systems from Leica and API (Leica AT960-XR with T-Probe and T-Scan 5, API OmniTrac 2 with vProbe). These systems combine highest measurement accuracy with ultra-mobility. Measurement volumes of up to 100 m diameter can be measured from a single point of view with accuracies in the 0.1 mm range. In addition, the systems are equipped with optional probes…
    Save
  • 3D scanners & automated inspection

    • InnoTrans 2018
    • Hall 8.2 307
    Creaform offers a wide range of scanning solutions also featuring TRUaccuracy technology and dynamic referencing. This gives Creaform scanner users the benefit of portable measurement equipment they can simply bring to the part they need to measure. The white light scanner Go!SCAN 3D and the 3D scanners Handyscan 3D and MetraSCAN 3D are ideal for performing 3D inspection, quality control, reverse engineering, CAD comparison, 3D modelling and conformity assessment tasks.  For automated inspe…
    Save
  • 3D Wheel Measurement System

    New
    • InnoTrans 2018
    • Hall 6.2 115
    The system is designed for contactless, automatic real-time measurement of rail vehicles (locomotives, railcars, underground trains, trams) and uses a combination of five laser scanners that are mounted in the track area and calibrated to a common system. The measuring cycle starts when an inductive sensor detects a wheel (RFID code). As the wheel passes through the laser scanner system, the diameter, profile and distance between the wheels are measured and corresponding tolerances are given. T…
    Save
  • 470-SJ Feed Unit

    Product of Sponge-Jet, Inc.
    • InnoTrans 2018
    • Hall 8.2 109
    This Feed Unit is feature-rich and larger the than our most popular Feed Unit with up to two and a half hours of uninterrupted blast time before refilling. Features specific to the 470-SJ are: Utility step High-capacity muffler Blast pressure adjustment Lifting eyes Fork pockets High-performance casters Secondary moisture separator High-volume pressure relief valve Centralized controls for precision monitoring and adjustment …
    Save
  • A Bogie / Wheel-set exchange

    Product of Mechan Limited
    • InnoTrans 2018
    • Hall 2.2 206
    Mechan offers an extensive range of bogie and wheelset drop systems to suit all applications. Its bogie drops facilitate the removal and replacement of complete bogies and undergear equipment from coupled rail vehicles. When they are not in use, the road they are situated on is safe for normal depot traffic, as the rail beams latch into place and fully interlock. A pit under the bogie gives full clearance and side platforms offer all-round access to the item being changed. Mechan provides bogi…
    Save
  • A coil and leaf springs testing stand

    • InnoTrans 2018
    • Hall 23 608
    The correct state of resilient elements is a prerequisite the proper functioning of rail vehicles. For this reason the coil and leaf springs must be regularly tested to determine their properties and characteristics. Offered by MTL Asco Rail testing devices provide testing to the full extent required for coil and leaf springs. The stand is designed to testing the following types of springs:coil springs and a set of those springs, volute springs, leaf springs and parabolic leaf springs, metal-rub…
    Save
  • A Mechan Railcar Lifting Jack

    Product of Mechan Limited
    • InnoTrans 2018
    • Hall 2.2 206
    Our flagship jacks are raising standards in the transport industry. Thanks to our patented Megalink controller, they enable the synchronised lifting of multiple rail cars by a single operator. Mechan’s jacks can be divided into three main types. All have the same high standards of construction and function, but boast different features: Mobile jacks (fixed anvil) should be used on a flat workshop floor. They have a built-in jacking and steering mechanism and fixed anvil. The complete ja…
    Save