767 results

Filter search

Apply filters

Types

Trade shows

Country/Region

Region

767 results

  • "PULLPO" ball bearing puller set, K-70-C

    To remove grooved ball bearings without causing damage and without having to dismantle the shaft. Description With this puller, grooved ball bearings that are simultaneously located on a shaft and in a casing can be quickly and easily removed. Puller is self-tensioning and easy to handle. Pulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force. Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the ja…
    Save
  • 122 Fi

    InnoTrans 2020
    kompakte Maße optimale Werte 200 kg 2 Personen ab Führerschein Klasse B doppelte Isolation Elektroantrieb (als Option) enorme Ausstattungsvarianten doppelte Isolation gegen 1000 V nach DIN VDE 0682–742 aufrecht begehbare Kunststoffarbeitsbühne Einstiegsplattform aus Antirutsch-Aluminium Motor Start/Stopp von der Arbeitsbühne optionale Ausbaumodule im Kastenwagen Aufbaumöglichkeit z.B. auf: VW Crafter / Mercedes Sprinter/Renault Master / Nissan NV 400 Arbeitshöhe 12,50 m seitliche Reichweite 7,0…
    Save
  • 214RR

    Product of START PAC
    InnoTrans 2020 InnoTrans 2018
    Save
  • 3324RR

    Product of START PAC
    InnoTrans 2020 InnoTrans 2018
    Save
  • 3370RR

    Product of START PAC
    InnoTrans 2020 InnoTrans 2018
    Save
  • 3D Metrology

    InnoTrans 2018
    GMA Werkstoffprüfung GmbH uses state-of-the-art laser tracker systems for a wide range of demanding geometric measurements in industry. These are systems from Leica and API (Leica AT960-XR with T-Probe and T-Scan 5, API OmniTrac 2 with vProbe). These systems combine highest measurement accuracy with ultra-mobility. Measurement volumes of up to 100 m diameter can be measured from a single point of view with accuracies in the 0.1 mm range. In addition, the systems are equipped with optional probes…
    Save
  • 3D Wheel Measurement System

    InnoTrans 2020 InnoTrans 2018
    The system is designed for contactless, automatic real-time measurement of rail vehicles (locomotives, railcars, underground trains, trams) and uses a combination of five laser scanners that are mounted in the track area and calibrated to a common system. The measuring cycle starts when an inductive sensor detects a wheel (RFID code). As the wheel passes through the laser scanner system, the diameter, profile and distance between the wheels are measured and corresponding tolerances are given. T…
    Save
  • A Bogie / Wheel-set exchange

    Product of Mechan Limited
    InnoTrans 2018
    Mechan offers an extensive range of bogie and wheelset drop systems to suit all applications. Its bogie drops facilitate the removal and replacement of complete bogies and undergear equipment from coupled rail vehicles. When they are not in use, the road they are situated on is safe for normal depot traffic, as the rail beams latch into place and fully interlock. A pit under the bogie gives full clearance and side platforms offer all-round access to the item being changed. Mechan provides bogi…
    Save
  • A coil and leaf springs testing stand

    InnoTrans 2020 InnoTrans 2018
    The correct state of resilient elements is a prerequisite the proper functioning of rail vehicles. For this reason the coil and leaf springs must be regularly tested to determine their properties and characteristics. Offered by MTL Asco Rail testing devices provide testing to the full extent required for coil and leaf springs. The stand is designed to testing the following types of springs:coil springs and a set of those springs, volute springs, leaf springs and parabolic leaf springs, metal-rub…
    Save
  • A Mechan Railcar Lifting Jack

    Product of Mechan Limited
    InnoTrans 2018
    Our flagship jacks are raising standards in the transport industry. Thanks to our patented Megalink controller, they enable the synchronised lifting of multiple rail cars by a single operator. Mechan’s jacks can be divided into three main types. All have the same high standards of construction and function, but boast different features: Mobile jacks (fixed anvil) should be used on a flat workshop floor. They have a built-in jacking and steering mechanism and fixed anvil. The complete ja…
    Save
  • A Workshop Equipment

    Product of Mechan Limited
    InnoTrans 2018
    Mechan’s extensive range of rail depot maintenance products include:Railcar lifting jacks Underfloor lifting systems Bogie drops and wheelset drops Railcar traversers and turntables Bogie test machines and bogie press equipment Bogie handling – platforms, manipulators, turntables and storage Engine removal and handling equipment Under-car equipment removal and handling equipment
    Save
  • A.S.E.A. Moumtzis A.G.

    Exhibitor
    Greece
    InnoTrans 2018
    • Railway Technology Railway Technology
    Save