25 results

  • Small 14 W DC/DC Converters for Railway Applications

    InnoTrans 2021 InnoTrans 2018
    MTM Power GmbH, the specialist for individual power supplies, offers in its extensive portfolio the DC/DC converters of the series PMGS/PCMGS14 for automotive and railway applications. The devices are available with a nominal input voltage of 72 VDC or 110 VDC and provide an output voltage of 24 VDC (12 VDC and 48 VDC on request). The PMGS/PCMGS14 come with an input reverse polarity protection by a series diode and are continuous short circuit protected. The converters operate at an ambient temp…
    Save
  • Series PMDS/PCMDS30 U-VT for Railway Applications

    InnoTrans 2021 InnoTrans 2018
    This primary switched DC/DC converters series PMDS/PCMDS30 U-VT of MTM Power is especially designed for automotive and railway applications. These converters operate according to the current source push-pull principle and working with a frequency of 70/140 kHz. Advantages of this switching topology are the wide input voltages with constant efficiency, transformer with good coupling and low leakage inductance, at the same time usable for direct control of the secondary synchronously detection. Th…
    Save
  • PCMDS400 - DC/DC Converters for Railway Applications

    InnoTrans 2021 InnoTrans 2018
    Save
  • Earthing tapes

    InnoTrans 2021 InnoTrans 2018
    High-flexible connectors and high-current connectors in solderless pressed version Druseidt-connectors are extreme flexible connectors which are made out of high-flexible wires with a diameter of 0.07 or 0.10 mm. On both ends we press E-Cu-contact-husks with high pressure and without soldering onto the cable/braid. The hereby used druseidt-press-technology guarantee extreme compressing and a optimal contact resistance. As an opposite to the typical method by using terminal lugs this procedure…
    Save
  • High Current Connectors

    InnoTrans 2021 InnoTrans 2018
    Druseidt-connectors are extreme flexible connectors which are made out of high-flexible wires with a diameter of 0.07 or 0.10 mm. On both ends we press E-Cu-contact-husks with high pressure and without soldering onto the cable/braid. The hereby used druseidt-press-technology guarantee extreme compressing and a optimal contact resistance. As an opposite to the typical method by using terminal lugs this procedure makes a fully pressed braid-integrated contact-area. Through the very high pressure t…
    Save
  • Silicone insulated copper cables

    InnoTrans 2021 InnoTrans 2018
    This high-flexible cables in combination with their technical dates offer excellent possibilities for high-current connections. They are deliverable in the range from 4cmm² til 150 mm². These cables are halogenfree, have a very high operation temperature of the insulation up to shortly 300 degrees Celsius, good UV and Ozone stability and excellent electric arc- and tracking resistance. The Operating Voltage is for the range 4 - 6 mm² 1,5 kV, for the range 10 - 150 mm² 2,0 kV. It is possible…
    Save
  • ProLine P 50 000 - Transducers for High Voltage and Current Measurement in Railway Applications

    InnoTrans 2021 InnoTrans 2018
    Higher safety and flexibility achieved through a new housing concept - specifically designed for railway applications with conformity to all relevant railway standards including fire and smoke regulations.   Electric as well as diesel-electric locomotives and multiple units require multifold monitoring and control of electric energy. Voltage and current sensors used for this purpose need to meet the particular demands posed by railway operations. This is a matter particularly regarding fire and …
    Save
  • ProLine P 16000 – SIL2 Pulse Frequency Conditioners and Isolated Standard Signal Conditioners for Use on Rolling Stock

    InnoTrans 2021 InnoTrans 2018
    The ProLine P 16000 receives standard signals or signals from speed sensors and transmits and converts them into electrically isolated analog standard signals. The input is designed in a way that it can “tap” signals from existing circuits without disturbing the original signal. This absence of interaction complies with the SIL 2 integrity level according to EN 61508. Even a safety-oriented signal from a sensor can be duplicated and transmitted to a second controller without any interaction. …
    Save
  • SYKO 1 Ph - 3 Ph inverters up to 10 kW

    InnoTrans 2021 InnoTrans 2018
    SYKOs 1 Ph and 3 Ph inverters with and without isolation are designed for use in mobile and stationary applications. Use on rail vehicles in accordance with standards EN50155, 50121, 61373, 50178, 62368, 45545, 60068-2-38 is also recommended by the characteristics of internal and external interface performance (e.g., rms current, voltages) through component compatibility. From low-voltage battery circuits 24/36/72/110 V, inverters in the power range (150 - 3900) W and cascaded up to 8 kW are rel…
    Save
  • SYKO onboard battery charger and track sided equipment

    InnoTrans 2021 InnoTrans 2018
    SYKOs battery chargers are cascaded for series use on rail vehicles such as trams, metros, locomotives or trainsets with services for standstill/charge maintenance up to the on-board power generation n x 6 kW. The regulated parallel operation not only ensures an increase in performance, but also underlines the safety concept from the point of view of securing redundant emergency running properties. The balancing between the individual power units takes place via digital interfaces as well as onc…
    Save
  • SYKO power supplies for railway applications 5 W up to 24 kW

    InnoTrans 2021 InnoTrans 2018
    SYKOs DC/DC converters with and without isolation are designed for an operation on low-voltage batteries 24/36/72/110 VDC, high-voltage cells, DC-link circuits, overhead line voltages 600/750/1500 VDC as well as UIC networks. Power components up to 3 kW/dyn. 4,2 kW are suitable for low-voltage applications, cascadable up to >8 kW, for intermediate circuits and overhead line voltages up to 6 kW (dyn. >10 kW), cascadable up to 24 kW. The devices are series-tested as front-end devices, potential-se…
    Save
  • Bahn-Antrieb

    Product of mdexx GmbH
    InnoTrans 2018
    Since several years the traction technique experienced a rapid expansion in both, light rail systems as well as long-distance traffic. We supply the electrical components to run the drive and auxiliary systems smoothly in high vibration stress or under large temperature fluctuations as well as the fans for cooling and ventilation. We offer: Isolating transformers, autotransformers, leak transformers, converter transformers Power supplies (non-stabilized) Commutation reactors, li…
    Save